Maytag MEDC200XW

Difficulty: Moderately easy
Instructions
Things you need

    Flat head screwdriver
    Hex Driver
    Phillips screwdriver
    Teflon plumbing tape
    Rubber washer
    Faucet handle screw

    The faucet handle screw. Looking at the front and the back of the faucet handle for a small screw. Remove them with a screwdriver. On some models you need to tap a hex screwdriver or Allen wrench. If you use the screw, the edge of a flat blade screwdriver to reveal the temperature gauge on the handle to pry the bolt out of view. Loosen it with a screwdriver, and lift straight.
    Check the valve. On top of the stem is formed star to fit the faucet handle. If it be inside or on the handle folds away, it will not fall. Wrap Teflon plumbing tape around the tip of the stem. You may need to include two or three times. Check by moving the handle on the top and check. Wrapping tape, if the handle to stop fits.
    Replace the faucet handle with a new screw of the same size.
    Slip a rubber washer over the end of the faucet handle screw and slide it up under his head. Insert the screw into the faucet handle and drag. The washing machine will help to keep a loose handle in position.
    Replace the faucet-temperature indicator, if you removed it. Maytag MEDC200XW